Precision CNC Milling.

SPEQS operates an extensive CNC milling fleet in Singapore, running numerous Mori Seiki, Hwacheon, Makino, Brother, Daewoo, and Sugino machining centres across 3-, 4-, and 4.5-axis configurations. Our largest machines travel up to 1000 mm x 550 mm x 510 mm, with select Hwacheon and Makino centres fitted with Nikken rotary heads for 4.5-axis positioning on complex, single-setup geometries, several running under robotic tending for continuous, repeatable production across aerospace, medical device, and oil & gas work.

AS9100D ISO 13485 ISO 9001:2015
A robotic arm tending a Makino Slim3n 4.5-axis CNC machining centre on the SPEQS shop floor
Robotic tending on one of our Makino Slim3n 4.5-axis machining centres.

Our CNC Milling Fleet, by Brand

SPEQS runs a mixed fleet of CNC machining centres selected for the travel, axis count, and speed range each job demands. Below is the maximum work envelope available under each brand.

Mori Seiki
Mori Seiki machining centre, the NV5000 · up to 1000 × 400 × 510 mm (X/Y/Z) travel
Hwacheon
Hwacheon machining centres including the Vesta 1000 10K and Vesta 1000+ 12K · up to 1000 × 550 × 500 mm travel · 4.5-axis capable
Makino
Makino Slim3n machining centres · up to 500 × 400 × 400 mm travel · 4.5-axis capable
Brother
Brother TC-31A/AN machining centres · up to 350 × 250 × 350 mm travel
Daewoo
Daewoo machining centre, the ACE TC380 · up to 520 × 370 × 350 mm travel
Sugino
Sugino machining centre, the H-715E · up to 300 × 200 × 200 mm travel
A range of finished CNC milled precision components, including a finned heatsink, flanges, and pocket-milled enclosures
A representative range of finish-milled components produced on our CNC milling fleet.

Complex Geometry, Consistently Delivered.

From dense-finned heatsinks and pocket-milled enclosures to precision flanges and small connective brackets, our 3-, 4-, and 4.5-axis machining centres hold the same dimensional and surface-finish standards across every geometry, however intricate.

Have a milled component to quote? Let’s talk about it.

AS9100D and ISO 13485 certified, machining precision milled components in Singapore since 1990.

Get in Touch